MACC: Special 390 A Bandsaw

Vendor MACC
Regular price $46,430.00 CAD
Sale price $46,430.00 CAD Regular price
Sale Sold out
Unit price
/per 
Shipping calculated at checkout.

Looking for automatic production cutting on solid bar? BTH carries the MACC Special 390 A, a fully automatic CNC bandsaw that takes solid round bar up to 220 mm (8.7 in) and round tube up to 300 mm (11.8 in) at a straight cut. It mitres from 0° to 60° right and stores 9 programs of 99 steps each.

Where the 390 A fits

  • 391 A: the same ball-screw feed and programs, with a smaller solid-bar capacity and more room at 60° right.
  • 391 AVG: hydraulic feed with no length limit, 39 programs of 50 steps, and a 20–90 m/min speed variator as standard.
  • 411 A: the automatic that mitres both ways, from 45° left to 60° right.

Cutting capacity

MACC Special 390 A cutting capacity by angle
Angle Solid round bar Round tube Square tube Rectangular tube
Straight (0°) 220 mm (8.7 in) 300 mm (11.8 in) 290 mm (11.4 in) 290 x 320 mm (11.4 x 12.6 in)
45° right 220 mm (8.7 in) 230 mm (9.1 in) 220 mm (8.7 in) 220 x 220 mm (8.7 x 8.7 in)
60° right 115 mm (4.5 in) 115 mm (4.5 in) 110 mm (4.3 in) 110 x 110 mm (4.3 x 4.3 in)

Millimetres are MACC's figures. Inches are conversions, rounded to one decimal.

How the cycle works

Once it's programmed, the saw repeats this cycle on its own:

  1. The material feeds in.
  2. The fixed vice locks.
  3. The blade starts and coolant flows, the bow feeds down until the cut is finished, and the feed carriage returns to the set length.
  4. The bow returns, and the blade and coolant stop.
  5. The vice opens.
  6. The cycle repeats.

Specs and standard equipment

  • Mitre range: 0° to 60° right.
  • 9 programs of 99 steps each, for a total of about 890 cutting positions, with a piece counter.
  • Step-by-step bar feed with a ball screw system.
  • Digital control of quantity and cutting length.
  • A hydraulic cylinder with cutting-pressure regulation.
  • Blade tension is set by turning a handwheel and guaranteed by an electro-mechanical switch.
  • A brush that cleans the blade.
  • Bimetal blade (length x width x thickness): 3200 x 27 x 0.9 mm.
  • Cutting thickness: 1.2 mm.
  • Hydraulic power unit: 0.75 kW.
  • Material feed stroke: 600 mm.
  • A 0.09 kW pump for blade coolant.

Power

The 390 A runs on 460 V three-phase with a BTH-supplied transformer to suit your shop. Its hydraulic power unit has a 0.75 kW motor. If you're not sure what your shop has, give us a call and we'll work it out with you.

What comes with it

Along with the saw, you get 3 spare blades and coolant. On request, MACC can add a hydraulic vertical pressing device for pack cutting (maximum cutting angle 45°) or a 20–90 m/min speed variator, and we can quote either one with your saw.

Owning a 390 A in Canada

The 390 A comes with a 12-month warranty. Installation is available on request, and training is available on the automatic cycle. We keep parts here in Canada, along with the blades the 390 A runs. For service, we send our own technician, and if we can't, we'll find a local technician near you who can do warranty-approved work. Ask us about financing, which is available.

Buying a 390 A in Canada

We're MACC's exclusive Canadian importer, a family-owned team in St. Marys, Ontario, in business since 2001. For a delivery estimate, email sales@bthsales.ca or call 519-461-1381.

Orders ship promptly once confirmed, and we'll send tracking when it leaves. Schools, military members and students can ask about our discounts.

Frequently Asked Questions

Can the MACC Special 390 A cut packs of bar?

MACC offers a hydraulic vertical pressing device for pack cutting on request. With it, MACC gives a maximum cutting angle of 45°. We can quote it with your saw, and if you'd like to talk through a bundle, call 519-461-1381.

What blade does the MACC Special 390 A use?

It uses a 3200 x 27 x 0.9 mm bimetal blade. If you want to vary the blade speed, MACC offers a 20–90 m/min speed variator on request.

Should I choose the MACC Special 390 A or the 391 AVG?

The 390 A feeds the bar with a ball screw and a 600 mm stroke, and stores 9 programs of 99 steps. The 391 AVG feeds hydraulically with no length limit, stores 39 programs of 50 steps, and has a 20–90 m/min speed variator as standard. On solid round bar at a straight cut, the 390 A takes up to 220 mm (8.7 in), against 230 mm (9.1 in) on the 391 AVG.

Can I get replacement blades for the MACC Special 390 A in Canada?

Yes, we keep blades and parts for the 390 A here in Canada. Email or call us with what you need.

Related products