Siegmund Bench Vice 150 for System 16
The Siegmund Bench Vice 150 (item 2-004330) is a cast-iron workshop vice with a 150 mm (5.91 in) jaw width and 150 mm (5.91 in) opening stroke. Double bore holes let you mount it at 45° or 90°. On a System 16 table use Fast Clamping Bolt 2-160511 with reduction bushings 000546. It also fits other 16 mm tables with Ø16 mm bores on a 50 mm grid (with the bolts and bushings above). Interchangeable jaw covers come in fiber, rubber and aluminum. For System 28 mounting, see the System 28 Bench Vice 150 collection. Exclusive Canadian importer of Siegmund. Ships across Canada from St. Marys, ON; most orders ship within 48 hours.
Specifications
- Jaw width: 150 mm (5.91 in)
- Opening stroke: 150 mm (5.91 in), opening to the front
- Body: high-quality cast iron; movable jaw carriage machined on 4 sides
- Clamping jaws, spindle and spindle key: hardened quality steel
- Mounting: double bore holes for 45° or 90°
Mounting on System 16 or System 28
- System 16: 2 x Fast Clamping Bolt 2-160511 + 2 x Reduction Bushing 000546 (ask us for bushings)
- System 28: 2 x Fast Clamping Bolt 2-280511
- Aluminum profiles: Areal Clamping Bolt 160590 recommended
Bolts are sold separately: see System 16 bolts and System 28 bolts.
Jaw covers
Jaw covers are interchangeable, in fiber, rubber and aluminum.
Related
View the Bench Vice 150 product page, the twin System 28 bench vice collection, Siegmund workbenches and System 16 clamps.
Frequently Asked Questions
How do I mount the Bench Vice 150 on a System 16 or System 28 table?
Siegmund specifies 2 Fast Clamping Bolts 160511 with 2 Reduction Bushings 000546 on System 16, and 2 Fast Clamping Bolts 280511 on System 28. The double bore holes let you mount the vice at 45° or 90° to the table.
Will it fit a 16 mm or 28 mm table that is not a Siegmund?
Yes. It fits other 28 mm system tables with Ø28 mm bores on a 100 mm grid and 16 mm tables with Ø16 mm bores on a 50 mm grid, using the matching fast clamping bolts.
Can I mount it on an aluminum-top workbench?
Yes. When clamping in aluminum profiles, Siegmund recommends the Areal Clamping Bolt 160590 instead of the standard fast clamping bolt. On aluminum, tighten bolts hand-tight only.
Which jaw covers should I use?
Fiber covers suit finely milled, planed, ground or polished surfaces; rubber covers suit wood and plastic parts; neutral aluminum covers grip coarse to medium-fine machined parts; aluminum prism covers hold round or oval parts. The covers attach magnetically and do not magnetize the workpiece.
