Fully Automatic Metal-Cutting Bandsaws
Fully automatic MACC bandsaws feed the material, clamp, cut and repeat the cycle with very little input from you. BTH carries four of them: the Special 390 A, 391 A, 391 AVG and 411 A. MACC bandsaws are made in Italy and priced in Canadian dollars.
All four run on 460 V three-phase with a BTH-supplied transformer to suit your shop.
How the automatic cycle works
Here's the cycle: the material feeds in, the fixed vice locks, the blade starts and coolant flows, the bow feeds down to the end of the cut, the feed carriage returns to the set length, the bow returns, the blade and coolant stop, the vice opens and the cycle repeats.
Compare the fully automatic saws
All four take round tube up to 300 mm (11.8 in) at a straight cut, so the choice comes down to solid-bar capacity, how the bar is fed, the number of programs and the mitre range. Programs are shown as programs x steps.
| Model | Round tube, straight | Solid round bar, straight | Mitre range | Bar feed | Programs | Choose this when |
|---|---|---|---|---|---|---|
| 390 A | 300 mm (11.8 in) | 220 mm (8.7 in) | 0° to 60° right | Ball screw | 9 x 99 | Most of your work is solid bar, up to 220 mm. |
| 391 A | 300 mm (11.8 in) | 150 mm (5.9 in) | 0° to 60° right | Ball screw | 9 x 99 | You cut mostly tube rather than solid bar. |
| 391 AVG | 300 mm (11.8 in) | 230 mm (9.1 in) | 0° to 60° right | Hydraulic, no length limit | 39 x 50 | You want more programs and a speed variator as standard. |
| 411 A | 300 mm (11.8 in) | Not listed | 45° left to 60° right | Hydraulic, no length limit | 39 x 50 | You need mitres both ways. |
Millimetres are MACC's figures. Inches are conversions, rounded to one decimal.
Stepping up from manual or semi-automatic
If you're happy to start each cut yourself, a semi-automatic bandsaw may be enough. For lower volumes, see manual bandsaws. Browse all MACC bandsaws or contact our team for a quote.
Owning a fully automatic MACC in Canada
Every fully automatic saw here comes with a 12-month warranty. We keep parts and blades for them in Canada, offer training, and install on request. Our own technician handles service, and if we can't send one, we'll find a local technician near you who can do warranty-approved work. Financing is available too, if you ask.
Want help matching a saw to your production runs? Email sales@bthsales.ca or call 519-461-1381. We're MACC's exclusive Canadian importer, a family-owned team in St. Marys, Ontario, in business since 2001. Ships across Canada from St. Marys, ON. Orders ship promptly once confirmed, and we'll send tracking when it leaves.
Frequently Asked Questions
How is fully automatic different from semi-automatic?
A semi-automatic saw runs one cut cycle each time you press start. A fully automatic MACC saw adds powered material feeding: it feeds the bar to length, locks the vice, cuts, returns and repeats the cycle.
How do the four models feed material?
The Special 390 A and 391 A feed step by step with a ball screw system. The 391 AVG and 411 A feed step by step hydraulically, with no length limit. Each saw's page has its feed and capacity details.
Can I program different lengths?
Yes. The Special 390 A and 391 A each come with 9 programs of 99 steps, about 890 cutting positions, and the 391 AVG and 411 A each come with 39 programs of 50 steps, 1950 cutting positions. All four have a piece counter.
Can I finance a MACC fully automatic bandsaw?
Financing is available on the fully automatic saws. Ask us about it when you're comparing models.