BTH carries the MACC Special 391 A for production runs cut to length. This fully automatic CNC bandsaw feeds the bar step by step with a ball screw system and stores 9 programs of 99 steps each. It takes round tube up to 300 mm (11.8 in) at a straight cut and mitres from 0° to 60° right.
Is the 391 A the right automatic?
The 391 A and the 390 A share the ball-screw feed, the program count and the mitre range; their capacity tables differ, and the FAQ below sets out how. If you want hydraulic feed with no length limit and more programs, look at the 391 AVG, or the 411 A if you also mitre to the left.
Cutting capacity
| Angle | Solid round bar | Round tube | Square tube | Rectangular tube |
|---|---|---|---|---|
| Straight (0°) | 150 mm (5.9 in) | 300 mm (11.8 in) | 290 mm (11.4 in) | 290 x 320 mm (11.4 x 12.6 in) |
| 45° right | 150 mm (5.9 in) | 235 mm (9.3 in) | 225 mm (8.9 in) | 225 x 225 mm (8.9 x 8.9 in) |
| 60° right | 100 mm (3.9 in) | 140 mm (5.5 in) | 130 mm (5.1 in) | 130 x 130 mm (5.1 x 5.1 in) |
Millimetres are MACC's figures. Inches are conversions, rounded to one decimal.
How the cycle works
Once it's programmed, the saw repeats this cycle on its own:
- The material feeds in.
- The fixed vice locks.
- The blade starts and coolant flows, the bow feeds down until the cut is finished, and the feed carriage returns to the set length.
- The bow returns, and the blade and coolant stop.
- The vice opens.
- The cycle repeats.
Specs and standard equipment
- Mitre range: 0° to 60° right.
- 9 programs of 99 steps each, for a total of about 890 cutting positions, with a piece counter.
- Step-by-step bar feed with a ball screw system.
- Digital control of quantity and cutting length.
- A hydraulic cylinder with cutting-pressure regulation.
- Blade tension is set by turning a handwheel and guaranteed by an electro-mechanical switch.
- A brush that cleans the blade.
- Bimetal blade (length x width x thickness): 3200 x 27 x 0.9 mm.
- Cutting thickness: 1.2 mm.
- Hydraulic power unit: 0.75 kW.
- Material feed stroke: 600 mm.
- A 0.09 kW pump for blade coolant.
Power
The 391 A runs on 460 V three-phase with a BTH-supplied transformer to suit your shop. Its hydraulic power unit has a 0.75 kW motor. If you're not sure what your shop has, give us a call and we'll work it out with you.
What comes with it
Your saw arrives with 3 spare blades and coolant. On request, MACC can add a blade speed inverter from 20 to 90 m/min or a hydraulic vertical pressing device for pack cutting, and we can quote either one with your saw.
Owning a 391 A in Canada
Financing is available on the 391 A, so ask us. We keep the saw's parts and blades here in Canada, and it comes with a 12-month warranty. If it needs service, we'll send our own technician, or a local technician near you who can do warranty-approved work if we can't send ours. Training is available for your operators, and installation is available on request.
Talk to us about the 391 A
Questions about programs, the feed or delivery to your shop? Email sales@bthsales.ca or call 519-461-1381. Orders ship promptly once confirmed, and we'll send tracking when it leaves.
We're MACC's exclusive Canadian importer, a family-owned team based in St. Marys, Ontario, in business since 2001. We offer school, military and student discounts, too.
Frequently Asked Questions
What's the difference between the MACC Special 391 A and the 390 A?
Both feed the bar step by step with a ball screw system, store 9 programs of 99 steps, and mitre from 0° to 60° right. Their capacity tables differ: at a straight cut, the 390 A takes solid round bar up to 220 mm (8.7 in), against 150 mm (5.9 in) on the 391 A. At 60° right, the 391 A takes round tube up to 140 mm (5.5 in), against 115 mm (4.5 in) on the 390 A.
How many cutting programs does the MACC Special 391 A store?
The MACC Special 391 A comes with 9 programs of 99 steps each, for about 890 cutting positions, with a piece counter. It feeds the bar step by step with a ball screw system, and the feed stroke is 600 mm.
What comes with the MACC Special 391 A, and what can be added?
Every 391 A comes with 3 spare blades and coolant. MACC also offers a blade speed inverter from 20 to 90 m/min and a hydraulic vertical pressing device for pack cutting on request, and we're happy to quote them for you.
Can I spread the cost of a MACC Special 391 A?
Financing is available on the 391 A. Ask us about it and we'll talk it through with you.


