If you cut a lot of pieces to length, BTH carries the MACC Special 391 AVG to do the feeding, clamping and cutting for you. This fully automatic CNC bandsaw feeds the bar hydraulically with no length limit, stores 39 programs of 50 steps each, and takes round tube up to 300 mm (11.8 in) at a straight cut.
Where the 391 AVG fits
Among the fully automatic saws, the 391 AVG pairs hydraulic bar feed with a 20–90 m/min speed variator as standard. The 390 A and 391 A feed with a ball screw and store 9 programs of 99 steps. The 411 A has the same feed and programs as the 391 AVG and adds mitres to 45° left. If you'd rather load each cut yourself, the 391 SVG is the semi-automatic cousin.
Cutting capacity
| Angle | Solid round bar | Round tube | Square tube | Rectangular tube |
|---|---|---|---|---|
| Straight (0°) | 230 mm (9.1 in) | 300 mm (11.8 in) | 290 mm (11.4 in) | 290 x 320 mm (11.4 x 12.6 in) |
| 45° right | 200 mm (7.9 in) | 230 mm (9.1 in) | 230 mm (9.1 in) | 230 x 230 mm (9.1 x 9.1 in) |
| 60° right | 130 mm (5.1 in) | 130 mm (5.1 in) | 125 mm (4.9 in) | 125 x 130 mm (4.9 x 5.1 in) |
Millimetres are MACC's figures. Inches are conversions, rounded to one decimal.
How the cycle works
Once it's programmed, the saw repeats this cycle on its own:
- The material feeds in.
- The fixed vice locks.
- The blade starts and coolant flows, the bow feeds down until the cut is finished, and the feed carriage returns to the set length.
- The bow returns, and the blade and coolant stop.
- The vice opens.
- The cycle repeats.
Specs and standard equipment
- Mitre range: 0° to 60° right.
- 39 programs of 50 steps each, for a total of 1950 cutting positions, with a piece counter.
- Step-by-step hydraulic bar feed with no length limit.
- Digital control of quantity and cutting length.
- A hydraulic cylinder with cutting-pressure regulation.
- Blade tension is set by turning a handwheel and guaranteed by an electro-mechanical switch.
- A brush that cleans the blade.
- Bimetal blade (length x width x thickness): 3200 x 27 x 0.9 mm.
- Cutting thickness: 1.2 mm.
- Material feed stroke: 500 mm.
- Hydraulic pump motor: 0.75 kW.
- A 0.09 kW pump for blade coolant.
- A speed variator from 20 to 90 m/min.
Power
The 391 AVG runs on 460 V three-phase with a BTH-supplied transformer to suit your shop. Its hydraulic pump motor is 0.75 kW. If you're not sure what your shop has, give us a call and we'll work it out with you.
What comes with it
Along with the saw, you get 3 spare blades and coolant. For pack cutting, MACC can add a hydraulic vertical pressing device on request, and we can quote it with your saw.
Owning a 391 AVG in Canada
We keep parts and blades for the 391 AVG here in Canada. For service, we send our own technician, or, if we can't, we'll find a local technician near you who can do warranty-approved work. Every 391 AVG has a 12-month warranty. Training is available to help your team with programming and the feed, financing is available when you ask us, and installation is available on request.
Buying the 391 AVG
School, military or student? Ask about our discounts when you get in touch.
Email sales@bthsales.ca or call 519-461-1381 with your location for a delivery estimate. Orders ship promptly once confirmed, and we'll send tracking when it leaves. We're MACC's exclusive Canadian importer, a family-owned team in St. Marys, Ontario, in business since 2001.
Frequently Asked Questions
How many cutting programs does the MACC Special 391 AVG store?
The 391 AVG stores 39 programs of 50 steps each, for 1950 cutting positions, with a piece counter. It feeds the bar step by step hydraulically, with no length limit, and the feed stroke is 500 mm.
Can the MACC Special 391 AVG cut packs of material?
MACC offers a hydraulic vertical pressing device for pack cutting on request, and we can quote it with your saw. We don't publish a bundle size for the 391 AVG, so call 519-461-1381 and we'll talk through the cut.
What blade does the MACC Special 391 AVG take?
It takes a 3200 x 27 x 0.9 mm bimetal blade. A 20–90 m/min speed variator is standard, so you can set the blade speed to suit the material.
What happens if my MACC Special 391 AVG needs a repair?
Call us. We send our own technician, and if we can't, we'll find a local technician near you who can do warranty-approved work on your 391 AVG.


