SIEGMUND SYSTEM 16 - PRISM Ø 80 120° WITH SCREWED-IN COLLAR
The Siegmund System 16 Professional Clamps are compatible with any 16mm fixture table. Made in Germany to the highest of quality assurance, you know that with Siegmund tooling, you will not be let down.
Technical Data:
|
Item No.: 160652.1
Prism Ø 80 120° with screwed-in collar ‐ burnished
| Height (c) |
30 mm |
| Weight |
0,77 kg |
| Diameter |
80 mm |
Product description
Prism Ø 80 with 120° angle, suitable for pipes with a diameter of up to 120 mm. The Prism creates a stable surface especially for round pipes and can be used for all 16 mm boreholes.
The prism with screwed-in collar can be fastened in the boreholes. For free positioning of the prism independent of the hole grid you can easily unscrew the collar from the prism. If necessary, the working height of the prism can be varied by a prism extension.
Polyamid Prisms are used for scratch-prone surfaces.
‐ M10 thread for e.g. prism extensions Item No. 160649
Item No.: 160652.1.PA
Prism Ø 80 120° with screwed-in collar ‐ Polyamide
| Height (c) |
30 mm |
| Weight |
0,12 kg |
| Diameter |
80 mm |
Product description
Prism Ø 80 with 120° angle, suitable for pipes with a diameter of up to 120 mm. The Prism creates a stable surface especially for round pipes and can be used for all 16 mm boreholes.
The prism with screwed-in collar can be fastened in the boreholes. For free positioning of the prism independent of the hole grid you can easily unscrew the collar from the prism. If necessary, the working height of the prism can be varied by a prism extension.
Polyamid Prisms are used for scratch-prone surfaces.
‐ M10 thread for e.g. prism extensions Item No. 160649
|
Item No.: 160652.1.A
Prism Ø 80 120° with screwed-in collar ‐ Aluminum
| Height (c) |
30 mm |
| Weight |
0,26 kg |
| Diameter |
80 mm |
Product description
Prism Ø 80 with 120° angle, suitable for pipes with a diameter of up to 120 mm. The Prism creates a stable surface especially for round pipes and can be used for all 16 mm boreholes.
The prism with screwed-in collar can be fastened in the boreholes. For free positioning of the prism independent of the hole grid you can easily unscrew the collar from the prism. If necessary, the working height of the prism can be varied by a prism extension.
‐ M10 thread for e.g. prism extensions Item No. 160649
|
Compatibility
-
Siegmund System 16: fits every System 16 Siegmund table, including the Professional Extreme 8.7 and 8.7 PLUS tables listed on bthsales.ca; Siegmund's page cross-references 160649; on a System 28 table it needs Siegmund's Reduction Bushing 16->28 (000545, boreholes only) to clamp with System 28 bolts, or the Adapter Sleeve 16->28 (000547) to locate it without clamping; neither is listed on bthsales.ca.
Related: System 16 Prism Screw · All Siegmund System 16 prisms and supports · System 16 Professional Extreme 8.7 tables
Frequently Asked Questions
What pipe sizes does the Prism Ø80 120° take?
Siegmund says it suits pipes with a diameter of up to 120 mm and can be used in all 16 mm boreholes.
Can I position it off the hole grid?
Yes. The collar screws in, so it can be fastened in the boreholes, or you can unscrew the collar to position the prism freely. An M10 thread takes prism extensions such as 160649.
Which material should I choose?
This page offers burnished (160652.1), aluminum (160652.1.A) and polyamide (160652.1.PA). Siegmund uses polyamide prisms for scratch-prone surfaces.
