3YO Technology

3YO Technology makes natural-based surface protection, anti-spatter and cleaning products for metal fabrication, laser, plasma and oxy-fuel cutting. BTH Sales sells the 3YO range in Canada and ships from St. Marys, Ontario.

Looking for Slat Juice? Shop 3YO TS Slat Juice (5 L), the self-cleaning treatment for laser table slats.

About 3YO

3YO Technology was founded by brothers Mirko and Loris Dalle Nogare. After years in the metalworking industry and a life-changing event in 2011, they set out to eliminate toxic substances and hazardous tools from industrial environments. After 12 years of research across four continents and testing in over 55 countries, they launched 3YO WG, the first of their line of sustainable, high-performance solutions. The range has since grown to include the 3YO Applicator, 3YO TS, 3YO RS, 3YO RC, 3YO AIR and 3YO SP. 3YO's registered office is in Pergine Valsugana (TN), Italy.

The 3YO range at BTH Sales

How 3YO is used on laser tables

3YO describes 3YO TS (Total Shield) as a self-cleaning solution for laser cutting systems, made from a formulation derived from natural ingredients, with no hydrocarbons, and tested on lasers up to 100 kW. It is applied with the 3YO Applicator, 3YO's official applicator for TS, to the cutting bed and the recovery area beneath it, so debris doesn't stick, drawers and cutting beds are easier to clean, and critical components stay protected.

In practice, per BTH's product pages:

  1. Fill the 3YO Applicator with Slat Juice; no mixing is needed.
  2. Coat the slats with the Applicator. You can also treat scrap conveyors, trays and slag deflectors.
  3. Reapply every 7–14, 14–21 or 21–28 days, depending on how many shifts the table runs, and at least every 28 days.

Ready to try it? Start with the 1 L sample kit or go straight to 3YO TS Slat Juice.

3YO frequently asked questions

Who makes 3YO products?

3YO Technology is an Italian company founded by brothers Mirko and Loris Dalle Nogare. Its registered office is in Pergine Valsugana (TN), Italy. BTH Sales sells 3YO products in Canada.

What is 3YO TS Slat Juice used for?

3YO TS (Total Shield) is 3YO's self-cleaning solution for laser cutting systems. It is applied to the cutting table and the scrap zone so that debris doesn't stick, which keeps slats and drawers cleaner and makes cleaning easier. See 3YO TS Slat Juice.

How do you apply 3YO Slat Juice?

3YO TS is applied with the 3YO Applicator, which 3YO specifies as its official applicator for TS. Apply only with the 3YO applicator gun, not a brush or by pouring, for an even coat on every slat. Reapply every 7–14, 14–21 or 21–28 days, depending on how many shifts the table runs, and at least every 28 days.

Which 3YO size should I start with?

To try it, start with the 1-litre sample kit, which includes an applicator. The 15-litre starter kit includes an applicator and three 5-litre bottles. Refills come in 5-litre and 20-litre sizes.

Do you ship 3YO products across Canada?

BTH Sales ships across Canada from St. Marys, Ontario.

Questions about 3YO? Contact BTH Sales.