MACC: Special 215 Bandsaw

Vendor MACC
Regular price $6,275.00 CAD
Sale price $6,275.00 CAD Regular price
Sale Sold out
Unit price
/per 
Shipping calculated at checkout.

BTH carries the MACC Special 215 for shops that want a simple manual saw for tube and bar up to 150 mm (5.9 in). It mitres from 0° to 45° right, has a quick-lock vice and an adjustable stop for repeat cuts, and comes in three-phase or single-phase versions.

Is the 215 the right fit?

The 215 is the entry point to the MACC manual saws we carry. It makes sense when most of your cuts are tube and bar up to 150 mm, you mitre to one side only, and you'd like the option of running it on single-phase power.

If you need more room or steeper mitres, look at the 280 M. It adds adjustable widia (tungsten-carbide) tips on the blade guides, and the FAQ below sets out the capacity difference.

Cutting capacity

MACC rates the 215 for straight cuts and mitres up to 45° right.

MACC Special 215 cutting capacity by angle
Angle Round tube Square tube Rectangular tube
Straight (0°) 150 mm (5.9 in) 150 mm (5.9 in) 120 x 200 mm (4.7 x 7.9 in)
45° right 120 mm (4.7 in) 110 mm (4.3 in) 90 x 130 mm (3.5 x 5.1 in)

Millimetres are MACC's figures. Inches are conversions, rounded to one decimal.

Specs and standard equipment

  • Mitre range: 0° to 45° right.
  • A two-speed motor drives the blade through a reducer with a bronze gear and a hardened, ground worm screw.
  • The head pivots on a bolt with adjustable tapered bearings, so there's no play.
  • Sturdy blade guides with sealed bearings.
  • A vice with a quick-lock device.
  • An adjustable stop for cuts of the same size.
  • A 24 V low-voltage electrical system.
  • Overall dimensions (width x length x height): 1000 x 1155 x 1600.
  • A 0.06 kW pump for blade coolant.
  • Safety guards on the flywheel housing and the control handle.

Power

The three-phase version runs on 460 V three-phase with a BTH-supplied transformer to suit your shop. The single-phase version runs on 240 V, and MACC rates its single-phase motor at a 77 m/min blade speed. Pick the version you want with the Phase option, and check the single-phase supply with us before you order.

What comes with it

Along with the saw, you get 3 spare blades and coolant. The two-speed blade motor and the 0.06 kW coolant pump come standard.

Owning a 215 in Canada

Your 215 is covered by a 12-month warranty, and we keep parts and blades for it here in Canada. When it needs service, we send our own technician. If we can't, we'll find a local technician near you who can do warranty-approved work. Training is available if you'd like a hand getting started, and installation can be arranged on request. Financing is available too, so ask us.

Buying the 215 in Canada

Setting up a school shop, or are you a student or in the military? Ask about our school, military and student discounts when you get in touch.

We're a family-owned team in St. Marys, Ontario, in business since 2001, and MACC's exclusive Canadian importer. Orders ship promptly once confirmed, and we'll send tracking when it leaves. For a delivery estimate or a quick check on your power, email sales@bthsales.ca or call 519-461-1381.

Frequently Asked Questions

How much floor space does the MACC Special 215 need?

MACC gives the 215's overall dimensions as 1000 x 1155 x 1600 (width x length x height). If you're planning where it goes in your shop, call us at 519-461-1381 and we'll go over it with you.

Should I order the single-phase or the three-phase MACC Special 215?

Go by the power in your shop. If you have three-phase, the three-phase 215 runs on 460 V three-phase with a BTH-supplied transformer to suit your shop. If you only have single-phase, choose the 240 V single-phase version, which MACC rates at a 77 m/min blade speed. Not sure what you have? Check with us before you order.

When should I choose the MACC Special 280 M over the 215?

Pick the 280 M if your work runs bigger than 150 mm or you need to mitre past 45°. It takes round tube up to 220 mm (8.7 in) at a straight cut and mitres from 0° to 60° right, while the 215 tops out at 150 mm (5.9 in) and 45° right.

Does the MACC Special 215 come with coolant and spare blades?

Yes. It has a 0.06 kW electric pump for blade coolant, and every 215 ships with 3 spare blades and coolant.

Can you set up the MACC Special 215 and show my team how to use it?

We can. Training is available, and installation can be done on request, so tell us what you need when you order your 215.

Related products