MACC: Special 320 M/S Bandsaw

Vendor MACC
Regular price $15,980.00 CAD
Sale price $15,980.00 CAD Regular price
Sale Sold out
Unit price
/per 
Shipping calculated at checkout.

BTH carries the MACC Special 320 M/S for shops that want the saw to run each cut. Press the start button and it closes the vice, cuts, returns the bow and opens the vice again. It takes round tube up to 230 mm (9.1 in) and mitres from 0° to 60° right.

Is the 320 M/S the right fit?

The 320 M, 320 CSO and 320 M/S share the same capacity, so the choice comes down to how much of each cut you want to do yourself.

  • 320 M: a manual saw. You run the vice and the bow yourself.
  • 320 CSO: a hydraulic cylinder controls the bow's descent, while you still feed the bar, close the vice and return the head.
  • 320 M/S: one press of the start button runs the vice, the cut and the bow return for you. It's the one to pick when you have a lot of cuts to get through and want your hands free between them.

Cutting bigger work, or need to mitre left as well as right? The 335 M/S is the next step up; the FAQ below compares the two.

Cutting capacity

These are MACC's limits for the 320 M/S at each angle it cuts.

MACC Special 320 M/S cutting capacity by angle
Angle Round tube Square tube Rectangular tube
Straight (0°) 230 mm (9.1 in) 220 mm (8.7 in) 170 x 295 mm (6.7 x 11.6 in)
45° right 190 mm (7.5 in) 180 mm (7.1 in) 210 x 180 mm (8.3 x 7.1 in)
60° right 120 mm (4.7 in) 120 mm (4.7 in) 120 x 120 mm (4.7 x 4.7 in)

Millimetres are MACC's figures. Inches are conversions, rounded to one decimal.

How the cycle works

Press the double start button and the saw runs the cycle for you:

  1. The vice closes and the blade motor starts.
  2. The bow comes down through the cut.
  3. The bow returns to its start position.
  4. The blade motor stops.
  5. The vice opens.

You can also run a cut manually.

Specs and standard equipment

  • Mitre range: 0° to 60° right.
  • Cutting thickness: 1.2 mm.
  • A two-speed motor drives the blade through a reducer with a bronze gear and a hardened, ground worm screw.
  • The head pivots on a bolt with adjustable tapered bearings, so there's no play.
  • Sturdy blade guides with sealed bearings and adjustable widia (tungsten-carbide) tips.
  • An electro-mechanical blade tensioner with a microswitch tensions the band.
  • An adjustable stop for cuts of the same size.
  • A 0.06 kW pump for blade coolant.
  • Safety guards on the flywheel housing, the control handle and the blade.

Power

The 320 M/S is a three-phase saw, and it runs on 460 V three-phase with a BTH-supplied transformer to suit your shop. The blade is driven by a two-speed motor. Not sure what your shop has? Give us a call and we'll work it out with you.

What comes with it

Along with the saw, you get 3 spare blades and coolant. If you'd like to vary the blade speed, MACC offers a 20–90 m/min speed variator on request, and we can quote it with your saw.

Owning a 320 M/S in Canada

If your 320 M/S needs service, our own technician comes out. When we can't send one, we'll find a local technician near you who can do warranty-approved work. Parts and blades for the 320 M/S are kept here in Canada, and the saw carries a 12-month warranty. Financing is available, so ask us about it. We can also arrange training for whoever runs the cycle, and installation on request.

Getting a 320 M/S to your shop

Tell us where your shop is and what power you're running, and we'll put a delivery estimate together. Email sales@bthsales.ca or call 519-461-1381. Orders ship promptly once confirmed, and we'll send tracking when it leaves.

BTH is MACC's exclusive Canadian importer, a family-owned team in St. Marys, Ontario, in business since 2001. School, military and student discounts are available too, so just ask.

Frequently Asked Questions

When should I choose the MACC Special 335 M/S over the 320 M/S?

Go for the 335 M/S if your work runs bigger or you need to mitre both ways. It runs the same kind of semi-automatic cycle, takes round tube up to 260 mm (10.2 in) at a straight cut and mitres from 45° left to 60° right. The 320 M/S tops out at 230 mm (9.1 in) and mitres to the right only.

Can I change the blade speed on the MACC Special 320 M/S for stainless or other tough material?

The 320 M/S has a two-speed blade motor as standard, and MACC offers a 20–90 m/min speed variator on request if you want more control over blade speed. MACC doesn't publish blade or tooth recommendations for this saw, so call us at 519-461-1381 with the material and sizes you cut, steel or stainless, and we'll talk through the blade with you.

Can I still make a cut by hand on the MACC Special 320 M/S?

Yes. Alongside the semi-automatic cycle, MACC builds in the option of a manual cut. For a run of pieces at the same length, set the adjustable stop and let the cycle do the rest.

Does the MACC Special 320 M/S have blade coolant?

Yes. A 0.06 kW electric pump feeds coolant to the blade, and the saw ships with coolant and 3 spare blades, so you're ready for your first cuts.

Who services the MACC Special 320 M/S if something goes wrong?

We send our own technician, or, if we can't, a local technician near you who can do warranty-approved work. Parts and blades for the saw are kept here in Canada as well.

Related products