Every MACC saw ships with 3 spare blades and 1 jug of coolant.
MAXIMUM CUTTING CAPACITIES:
| Round Tube | Square Tube | Rectangular Tube |
|
Imperial:
Metric:
|
Imperial:
Metric:
|
Imperial:
Metric:
|
HOW TO USE IT
TECHNICAL DATA AND STANDARD ACCESSORIES
- Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return
- Vertical rotation on bolt with adjustable tapered bearings without backlash
- High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw
- Appropriately dimensioned flywheels
- Strong band guides with tight stress-raiser bearings and adjustable widia tips
- Band stretching is obtained by electro-mechanical blade tensioner with microswitch
- Vice with a device for quick approach
- Wide rotating material support table
- Accident-preventing devices on the flywheel casing, on the control handle, and on the blade
- Hydraulic cylinder for controlled descent
- Removable chip collection tray
- Cutting thickness 1,2 mm
- Cutting range 45° left 60° right
- Adjustable stop for cuts of the same size
- 24 V low tension plant
- 0,06 kW power-driver pump for band cooling
Frequently Asked Questions
What size material can the MACC Special 335 CSO cut?
At a straight cut, the MACC Special 335 CSO takes round tube up to 260 mm (10.2 in), square tube up to 250 mm (9.8 in) and rectangular tube up to 180 x 330 mm (7.1 x 13 in). It cuts from 45° left to 60° right; see the capacity table on this page for the limit at each angle.
How does the MACC Special 335 CSO cut?
On the MACC Special 335 CSO, the saw bow comes down under hydraulic control during the cut, through a hydraulic cylinder for controlled descent. You feed the bar, close the vice and return the head by hand.
What power supply does the MACC Special 335 CSO need?
The MACC Special 335 CSO comes in a three-phase or a single-phase version; choose one with the Phase option on this page. The three-phase version runs on 460 V three-phase with a BTH-supplied transformer to suit your shop. MACC lists the single-phase motor at a 75 m/min blade speed; contact BTH Sales to confirm the single-phase supply it needs.
What comes with the MACC Special 335 CSO, and what can be added?
The MACC Special 335 CSO ships from BTH Sales with 3 spare blades and 1 jug of coolant. On request, MACC also offers a pneumatic vice installation and a 20–90 m/min speed variator; ask BTH Sales for a quote.
How do I get a delivery estimate for the MACC Special 335 CSO in Canada?
To get a delivery estimate for the MACC Special 335 CSO, contact BTH Sales, the exclusive Canadian importer of MACC, at sales@bthsales.ca or 519-461-1381 with your location. School, military and student discounts are also available; just ask.
