MACC: Special 335 M Bandsaw

Vendor MACC
Regular price $12,070.00 CAD
Sale price $12,070.00 CAD Regular price
Sale Sold out
Unit price
/per 
Shipping calculated at checkout.

BTH carries the MACC Special 335 M for shops that need to mitre both ways on a manual saw. It swings from 45° left to 60° right, takes round tube up to 260 mm (10.2 in) at a straight cut, and has a wide rotating table to support the material. It comes in three-phase or single-phase versions.

Why pick the 335 M

Choose it over the 320 M when you need left-hand mitres or a bit more capacity; the 320 M mitres to the right only and takes round tube up to 230 mm (9.1 in). If you'd like the bow's descent under hydraulic control, the 335 CSO has it built in, and MACC offers a hydraulic brake for controlled descent on the 335 M on request. For bigger sections, see the FAQ on the 411 M below.

Cutting capacity

MACC Special 335 M cutting capacity by angle
Angle Round tube Square tube Rectangular tube
Straight (0°) 260 mm (10.2 in) 250 mm (9.8 in) 180 x 330 mm (7.1 x 13.0 in)
45° left 180 mm (7.1 in) 155 mm (6.1 in) 60 x 225 mm (2.4 x 8.9 in)
45° right 215 mm (8.5 in) 200 mm (7.9 in) 160 x 210 mm (6.3 x 8.3 in)
60° right 130 mm (5.1 in) 130 mm (5.1 in) 130 x 140 mm (5.1 x 5.5 in)

Millimetres are MACC's figures. Inches are conversions, rounded to one decimal.

Specs and standard equipment

  • Mitre range: 45° left to 60° right.
  • Cutting thickness: 1.2 mm.
  • A two-speed motor drives the blade through a reducer with a bronze gear and a hardened, ground worm screw.
  • The head pivots on a bolt with adjustable tapered bearings, so there's no play.
  • Sturdy blade guides with sealed bearings and adjustable widia (tungsten-carbide) tips.
  • An electro-mechanical blade tensioner with a microswitch tensions the band.
  • A vice with a quick-approach device.
  • A wide rotating table to support the material.
  • A removable chip collection tray.
  • An adjustable stop for cuts of the same size.
  • A 24 V low-voltage electrical system.
  • A 0.06 kW pump for blade coolant.
  • Safety guards on the flywheel housing, the control handle and the blade.

Power

Pick the version that suits your shop with the Phase option. The three-phase version runs on 460 V three-phase with a BTH-supplied transformer to suit your shop. If your shop has single-phase power, there's a 240 V single-phase version too, and MACC rates its motor at a 75 m/min blade speed. Not sure which one fits? Give us a call and we'll talk it through.

What comes with it

Your saw arrives with 3 spare blades and coolant. On request, MACC can add a pneumatic vice installation, a hydraulic brake for controlled descent or a 20–90 m/min speed variator, and we can quote any of them with your saw.

Owning a 335 M in Canada

Blades for the 335 M, along with its parts, are kept here in Canada. Should the saw need service, we send our own technician, or find a local technician near you who can do warranty-approved work if we can't. Your 335 M also comes with a 12-month warranty. We can install it on request and train whoever will run it, and financing is available if you ask us.

Buying a 335 M in Canada

Not sure whether to order single-phase or three-phase? Call 519-461-1381 or email sales@bthsales.ca and we'll check it against your shop's supply. Orders ship promptly once confirmed, and we'll send tracking when it leaves.

We're MACC's exclusive Canadian importer and a family-owned team in St. Marys, Ontario, in business since 2001. School, military and student discounts are available.

Frequently Asked Questions

How far can the MACC Special 335 M mitre to the left?

To 45° left, and to 60° right. At 45° left it takes round tube up to 180 mm (7.1 in), square tube up to 155 mm (6.1 in) and rectangular tube up to 60 x 225 mm (2.4 x 8.9 in).

Is the MACC Special 335 M available in single-phase?

Yes. Pick the single-phase version with the Phase option; it runs on 240 V, and MACC rates its motor at a 75 m/min blade speed. The three-phase version runs on 460 V three-phase with a BTH-supplied transformer to suit your shop.

When do I need the MACC Special 411 M instead?

When your work runs past 260 mm. The 411 M takes round tube up to 300 mm (11.8 in) and rectangular tube up to 200 x 400 mm (7.9 x 15.7 in) at a straight cut, with the same 45° left to 60° right mitre range. It's a three-phase saw.

Do you offer installation and training for the MACC Special 335 M?

Installation is available on request, and training is available too. Let us know when you order and we'll plan it with you.

Related products