For large bars and sections cut straight, BTH carries the MACC Special 700. Its saw arc slides vertically on two columns for a stiff, accurate cutting unit, and it takes round tube up to 525 mm (20.7 in) and rectangular tube up to 490 x 700 mm (19.3 x 27.6 in) at a straight cut.
Where the 700 fits
The 700, 700 DI and 702 GA share the twin-column frame, the 4 kW blade motor and the same blade. Our 700 capacity table covers straight cuts. The 700 DI's table adds mitre figures from 60° left to 45° right, and the 702 GA rotates automatically for programmed mitres and takes round tube up to 550 mm (21.7 in).
Cutting capacity
| Angle | Round tube | Square tube | Rectangular tube |
|---|---|---|---|
| Straight (0°) | 525 mm (20.7 in) | 500 mm (19.7 in) | 490 x 700 mm (19.3 x 27.6 in) |
Millimetres are MACC's figures. Inches are conversions, rounded to one decimal.
Specs and standard equipment
- The saw arc slides vertically on two columns, which gives the cutting unit its stiffness and accuracy.
- Blade motor: 4 kW.
- Control unit motor: 1.5 kW.
- Coolant pump: 0.12 kW.
- Flywheel diameter: 520 mm.
- Blade size (length x width x thickness): 5540 x 41 x 1.3 mm.
- Cutting thickness: 1.5 mm.
- Cuts up to 60° left and 45° right.
- Coolant tank: 50 l.
- A brush that cleans the blade.
Power
The 700 runs on 460 V three-phase with a BTH-supplied transformer to suit your shop. Besides the 4 kW blade motor, it has a 1.5 kW control unit motor and a 0.12 kW coolant pump. If you're not sure what your shop has, give us a call and we'll work it out with you.
What comes with it
Along with the saw, you get 3 spare blades and coolant. On request, MACC can add a chip extractor, micro-lubrication or a vertical pressing device, and we can quote any of them with your saw.
Owning a 700 in Canada
Financing is available on the 700, so ask us about it. Installation is available on request, and training is available for your crew. The saw comes with a 12-month warranty, and we keep parts here in Canada, along with blades for the 700. If service is needed, we send our own technician, or find a local technician near you who can do warranty-approved work if we can't.
Talk to us about the 700
A saw this size is worth a conversation. Email sales@bthsales.ca or call 519-461-1381 with your sections and location, and we'll come back with a delivery estimate. Orders ship promptly once confirmed, and we'll send tracking when it leaves.
We're a family-owned team in St. Marys, Ontario, in business since 2001, and MACC's exclusive Canadian importer. School, military and student discounts are available.
Frequently Asked Questions
Should I choose the MACC Special 700 or the 700 DI?
Both are twin-column saws with the same straight-cut capacity: round tube up to 525 mm (20.7 in) and rectangular tube up to 490 x 700 mm (19.3 x 27.6 in). Our 700 capacity table covers straight cuts only. If you need mitre capacities, the 700 DI's table gives figures from 60° left to 45° right.
What blade does the MACC Special 700 take?
It takes a 5540 x 41 x 1.3 mm blade, running on 520 mm flywheels and driven by a 4 kW motor.
What does the MACC Special 700 have for coolant and chips?
A 50 l coolant tank with a 0.12 kW pump, and a brush that keeps the blade clean. On request, MACC can add a chip extractor or micro-lubrication, and we can quote either with your saw.
Do you offer financing on the MACC Special 700?
Yes, financing is available on the 700. Ask us and we'll go over it with you.


