Collection:

Siegmund System 28 Stops

19 products
Siegmund System 28 Stops

Siegmund System 28 stops position workpieces against a fixed or adjustable edge on a 28 mm welding table: eccentric stops for fine adjustment in tight spaces, universal stops with boreholes or an elongated hole, flex stops for corners and freeform edges, flat squares, and the angle alignment template with its spacer sleeve.

These System 28 parts also fit other 28 mm system welding tables with Ø28 mm bores on a 100 mm grid. Exclusive Canadian importer of Siegmund. Ships across Canada from St. Marys, ON.

Compare System 28 stops

Manufacturer data from siegmund.com. Size = length × width × material thickness. Suffix .N = nitrided, .C = chromed, .A = aluminium.
Product Item numbers Size (mm) Adjustment (per Siegmund)
Eccentric Stops 280401.N, 280402.N (M10 thread), 280403.N Ø 60 / Ø 100, 25 thick Infinite adjustment by twisting; for restricted space
Universal Stop 100 280407.N, 280407.C 100 × 50 × 25 Boreholes only, 50 mm apart
Universal Stop 150 280408.N, 280408.C 150 × 50 × 25 Boreholes only, 50 mm apart
Universal Stop 250 280409.N, 280409.C 250 × 50 × 25 Boreholes only, 50 mm apart
Universal Stop 150L 280410.N, 280410.A, 280410.C 150 × 50 × 25 Elongated hole 0–100 mm
Universal Stop 225L 280420.N, 280420.A, 280420.C 225 × 50 × 25 Boreholes + elongated hole 0–100 mm; also used with prisms and adapters
Universal Stop 225L FDS 280421 225 × 50 × 25 Elongated hole 0–100 mm plus spring-loaded part; for serial production
Universal Stop 300 280426.N, 280426.C 300 × 50 × 25 Triple boreholes + elongated hole 0–100 mm
Universal Stop 325L 280422.N 325 × 50 × 25 Boreholes + elongated hole 0–100 mm
Universal Stop 525L 280424.N, 280424.C 525 × 50 × 25 Boreholes + elongated hole 0–100 mm
Universal Stop 500S 280430.N, 280430.C 500 × 100 × 25 Boreholes + elongated hole 0–200 mm; for large components
Universal Stop 750S 280432.N, 280432.C 750 × 100 × 25 Boreholes + elongated hole 0–200 mm; for large components
Universal Stop 1000S 280434.N, 280434.C 1000 × 100 × 25 Boreholes + elongated hole 0–200 mm; for large components
Flat Square 175 280445, 280445.C 175 × 175, height 50 Borehole + elongated hole, adjustable up to 100 mm
Flat Square 500 280444 500 × 375, height 100 Borehole + elongated hole, adjustable up to 200 mm
Flex Stop 25x156 Aluminum 280412 156 × 52 × 25 Elongated hole, 100 mm range; favoured for stainless steel and confined spaces
Flex Stop 25x140 Steel 280416 140 × 40 × 25 Elongated hole, 100 mm range; rounded clamping surfaces for corners
Angle Alignment Template 280455.N 250 × 250 × 5 10° steps or continuous 0–90°, 1° scale; includes 2 spacer sleeves
Spacer Sleeve 280538 Ø 35, height 20 Height compensation when clamping the angle alignment template with bolts

Looking for the Clamp Stop (280760)? Siegmund files it under Prisms & Supports, so it is in Siegmund System 28 Prisms & Supports.

Related collections

Frequently Asked Questions

What is the difference between the Universal Stop 100, 150L and 500S?

Siegmund makes the Universal Stop 100, 150 and 250 with boreholes only, spaced 50 mm apart, for a fixed position. The L versions (150L, 225L, 325L, 525L) combine system boreholes with an elongated hole adjustable over 0–100 mm. The S versions (500S, 750S, 1000S) are 100 mm wide with a 0–200 mm elongated hole and are designed for stops and positioning of large components.

When should I use an eccentric stop or a flex stop?

Siegmund says eccentric stops (280401.N, Ø 60 mm) give infinite adjustment by simply twisting them and are used where space is restricted. Flex stops adjust through their elongated hole and have rounded clamping surfaces for corners and free-shaped stop surfaces; the aluminum Flex Stop 25x156 (280412) is favoured when working with stainless steel and in confined spaces.

What does the FDS on the Universal Stop 225L FDS mean for setups?

The Universal Stop 225L FDS (280421) has an additional spring-loaded part. Siegmund says this makes it suitable for clamping metal and molded components, with no additional fixation needed if no major welding deformation is expected. Its elongated hole adjusts 0–100 mm, and Siegmund names serial production as the typical application.

Why does the angle alignment template need spacer sleeves?

The Angle Alignment Template (280455.N) sets angles in 10° increments or continuously from 0–90° with a 1° scale, and it ships with 2 spacer sleeves. Siegmund says the Spacer Sleeve (280538) is required as height compensation when clamping the template with bolts.

Orders ship promptly once confirmed, and we'll send tracking when it leaves.

Regular price $117.00 CAD
Sale price $117.00 CAD
Regular price
Unit price
per 
The Angle Alignment Template sets System 28 parts at a precise angle, either in 10° steps or continuously from 0 to 90°, using its 1° scale. Siegmund includes two spacer sleeves for clamping it wit...
Regular price $16.00 CAD
Sale price $16.00 CAD
Regular price
Unit price
per 
The Spacer Sleeve is the height compensation Siegmund requires when clamping the System 28 Angle Alignment Template with bolts. It is burnished, 20 mm high and 35 mm in diameter. BTH Sales is the e...
Regular price $50.00 CAD
Sale price $50.00 CAD
Regular price
Unit price
per 
Item 280412: Siegmund Flex Stop 25x156, aluminum, for System 28 welding tables with Ø28 mm bores. It is adjusted individually through its elongated hole (100 mm range); Siegmund says it is favoured...
Regular price $52.00 CAD
Sale price $52.00 CAD
Regular price
Unit price
per 
Item 280416: Siegmund Flex Stop 25x140, steel, galvanized, for System 28 welding tables with Ø28 mm bores. It is adjusted individually through its elongated hole (100 mm range), and its rounded cla...